B&W TS20037C ChromeTow & Stow 2x2-5/16 Dual Ball Hitch w/ 2.5in Shank, 5 Drop/5.5in Rise | Universal

Tow & Stow Mount Features:

• Multiple ball sizes eliminate the need for multiple ball mounts
• This trailer hitch stows under the vehicle when not in use
• Fits any standard 2-1/2 receiver
• Height adjusts in 1 increments for level towing
• Height adjusts in 1-3/8 increments for level towing
• Manufactured from high-yield tubing

Give Your Rig A Heavy-Duty Mount

The B&W Tow & Stow adjustable ball mount lets you tow a variety of trailers with different tongue heights. Having a 1-7/8" ball, a 2" ball and a 2-5/16" ball allows for even more versatility, making this the ultimate go-to ball mount if you own multiple trailers. To switch the hitch ball, simply remove the pin holding the balls in place and rotate the entire block that the balls are mounted on until the ball you want to use is on top. Then replace the pin to secure the block in place. Adjusting the height of the ball is just as easy. Remove the pins holding the ball mount platform in place and slide the platform up or down along the shank to the desired position. Once you have found the correct height, reinsert the pins and replace the clips.

Easy To Install And Enhances Towing or Hauling

The Tow & Stow ball mount features a channel that runs along both sides of the shank. This channel not only allows you to slide the ball mount platform up and down to adjust the ball height, but it also prevents removal of the platform when the ball mount is installed, which will help prevent theft of your trailer. A slot is cut into the adjustment channel near the top of the shank. To remove the ball mount platform from the shank you will need to remove the entire ball mount from your hitch. Then remove the pins that hold the platform in place. Flip the platform around to the stowed position on the rear of the shank, and then slide it up until the center pin lines up with the slot in the shank. Pull the platform out towards the rear of the shank until the pin pops out of the adjustment channel.

Specs:

• Application: 2-1/2" x 2-1/2" trailer hitch receivers
• 2-1/2" ball: 7,500 lbs
• 2-5/16" ball: 10,000 lbs
• Distance from center of hitch pin hole to center of hitch ball: 9", 10"
• Maximum drop 5"
• Maximum rise: 5-1/2-1/2"
• Incremental height adjustment: 1"
• Minimum clearance: 11"

Year Ranges	Make	Model	Series	Engine
	Ram

Property	Values
Year Ranges
Make	Ram
Model
Series
Engine