Exergy E05-40105 Inlet Metering Valve | 2011-2022 Ford 6.7L Powerstroke

Ford Powerstroke Exergy Inlet Metering Valve Features:

• Massively Improved 25-Micron rate screen
• Dual screen will not tear or de-laminate
• Saves injectors from metal contaminants
• Chokes off fuel supply sooner to prevent damage
• No loss of pump performance from upgraded filter
• Designed to support OEM or 10mm stroker CP4
• Premium stainless steel construction

Save your Truck from Thousands Worth of Damage

The CP4 pump on your Ford Powerstroke are prone to failure, but the Exergy Fuel System Saver is here to help and potentially save you thousands of dollars in the long run. Without this fuel system saver installed, a CP4 failure means your fuel system will have metal contaminants pushed in, ruining your injectors and other sensors. This aftermarket Inlet Metering Valve was designed to offer you the peace of mind in the event of a CP4 pump failure, ensuring your pump won't be destroyed. The important different between the OEM valve and the Exergy System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80-Micron later and is extremely flimsy, causing massive amounts of debris to enter the injectors when the pump ultimately fails. The Exergy System Saver is rated at an impressive 25-Microns and is double wrapped in two layers to prevent debris from entering the rest of the fuel system.

Premium Construction & Installation Info

The improved micron rating and doubled wrapped construction of the Exergy Inlet Metering Valve will do a much better job of keeping your fuel system clean from any unwanted debris. This system was constructed in a manner where it will never tear or de-laminate from the filter housing, ensuring lasting functionality and performance for many years to come. Another benefit to this unit is the screen will load up quicker than the factory screen in event of pump failure, choking the valve off sooner and shutting the truck down in shorter period of time. All of this is beneficial to improve the chance of the injectors not needing to be replaced after pump failure. Exergy has also flow tested the valve with the upgraded filter to ensure there us no measurable loss of pump performance with the finer screen. Both the screen and housing are constructed from premium stainless steel for superior strength and protection against any rust or corrosion. Like all of Exergy products, this System Saver has been properly de0burred and assembled using the appropriate process to guarantee proper cleanliness.

Vehicle Fitment: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Ford 6.7L Powerstroke

Year Ranges	Make	Model	Series	Engine
2011-2022	Ford	Super Duty	F250/F350	6.7L

Property	Values
Year Ranges	2011-2022
Make	Ford
Model	Super Duty
Series	F250/F350
Engine	6.7L