Zone Offroad D133 6in Coil Spring Lift Kit | 2008 Ram 2500 Power Wagon 4WD

• 100% bolt-on design for easy installation.
• High-strength control arm relocation brackets correct suspension geometry and add rigidity

Description

• Front Lift Height: 6"
• Rear Lift Height: 4"
• Front Lift Method: Coil Springs
• Rear Lift Method: Cast Blocks
• Lift Type: Lift Kit
• Wheel Size: 17 x 9
• Back Spacing: 5"
• Max Tire Size: 37 x 12.5
• Wheel Size 2: 18 x 9
• Back Spacing 2: 5"
• Max Tire Size 2: 37 x 12.5
• Wheel Size 3: 20 x 9
• Back Spacing 3: 5"
• Max Tire Size 3: 37 x 12.5
• Is Adjustable: No
• Finish: Powdercoat
• Cutting Required: No
• Accommodates Factory Wheels: See Notes
• Welding Required: No

• If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2â€-1-5/8†you will need ZOND8404 also with your kit.
• Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
• This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
• Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
• Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper's stock location.

• 03-12 Dodge 2500 4in Block Kit-3.5in Axle (ZOND1419)
• 03-13 Dodge 2500 Control Arm Mount Kit (ZOND1801)
• 08 Dodge 2500 6/8 Front Box Kit (ZOND1803)
• 03-12 Dodge 2500 6in Coils - gas (ZOND3601)
• Dodge PowerWagon Sway Bar Links (ZOND5301)