McGaughys 52350 7-9in Lift Kit - Silver | 2011-2019 Silverado/Sierra 2500HD 4WD Diesel

Description

7"-9" Premium Lift kit

Lift kit comes powder-coated silver

---

Note: Kit can be adjusted up to 9". Must add Torsion Keys #52310 (sold separately), Upper Control Arms #52314 (sold separately), and Lift Shims #52361 (sold separately)

---

If your vehicle is equipped with the optional factory heavy duty leaf spring (camper package), then provided u-bolts will be too short. You will need to either source out longer u-bolts or purchase the 3500 lift kit instead. As those u-bolts will be longer.

Fitment

2011-2019 GM 2500  Trucks

4wd Models

Diesel Models

Optional Add-Ons

Upper Control Arms #52314 (not included with kit)

Torsion Keys #52310 (not included with kit)

Rear Lift Shims #52361 (not included with kit)

Traction Bars #52318 (not included with kit)

Upgraded Front Reservoir Shocks #1102 (not included with kit)

Upgraded Rear Reservoir Shocks #1103 (not included with kit)

Front Shock Reservoir Mounts #52357 (not included with kit)

Upgraded Compression Struts #52315 (not included with kit)

Billet Face Plates for Upgraded Compression Struts #51411 (Black) / #51413 (Raw) (not included with kit)

Billet Face Plates for Traction Bars #51321 (Black) / #51323 (Raw) (not included with kit)

Billet Ball Joint Cap for Upper Control Arms #51052 (not included with kit)

This kit can be adjusted to 8" or 9". You will need Torsion Keys #52310 (sold separately), to raise up the front. You will also need the Rear Lift Shim Kit #52361 (sold separately), to raise the rear up.

If running this kit at the 9" position, we highly recommend using Upper Control Arms #52314 (sold separately) to help with bump stop clearance issues

Over-sized tires and heavier wheels can cause premature wear on factory and aftermarket components like ball joints, bushings, tie-rod ends, wheel bearings, idlers arms, drive-lines, etc…  You may need to replace / install new components sooner than factory recommendations based on the wheels and tires you choose. Please note that the heavier and wider wheels and tires combined with aggressive driving (off-road and on highways) will cause more wear on ALL moving parts, factory and aftermarket. Especially when vehicle is in 4wd or Auto-4wd / AWD modes. 

---

Spindles and u-bolts are shipped with protective coating on surface. This allows them to be delivered to you without rust. We recommend you clean and paint the parts before you install, to protect against any future rust. Remember, spindles and u-bolts are bare metal. And will rust without paint.

Replacement Parts