Industrial PDM-3354FCC.020 Fly Cut Coated & Chamfered Pistons Kit .020 | 1998.5-2002 Dodge 5.9L Cummins

Fly Cut Coated & Chamfered Pistons Kit Features:

• Drop In Replacement
• Complete W/ Rings, Wrist Pins And Clips
• Chamfered tops
• Fly Cut with .100 Valve Reliefs
• Thermal Barrier Coating For Piston Tops
• Ceramic Piston Skirt Coating

Boost Your rig's Power and Performance

PDM’s Ceramic Piston Skirt Coating, is designed to be used, on any rigid or semi rigid surface experiencing sliding, rotating or oscillating friction. This coating will carry loads in excess of 350,000 PSI as well as lubricate at temperatures in excess of 1600f. This coating combines the durability of a ceramic resin with the lubricity of the ceramic lubricant. It is used in applications where high temperatures, high loads and high speeds are experienced. When higher temperatures, than most other types of coatings can provide protection at, are experienced, this coating is fully capable of carrying the load. Gray in color it acquires a glass like finish in use. Cured film thickness of “.001” or less requires no change is piston clearance.

Secure Your Installations With Heavy-Duty Pistons

PDM’s Thermal Barrier Coating for piston tops is designed for Performance engines running; Nitrous oxide, supercharged or Turbocharged. It creates a hard surface specifically designed for engines running High volumes of fuel and/or high compression ratios. The thermal barrier coating. Reduces part temperature. Keeps heat in combustion chamber longer through the power stroke. Increase torque, H.P. and improved combustion chamber efficiency.

Note: *All Industrial Injection Performance Products Are Not Legal For "On-Road", "Off-Road", or "Dual-Use". These Products May Only Be Used In " Dedicated Competition Use Only" Vehicles.

Note: *Sold in a set of 6

Vehicle Fitment: 1998.5-2002 Dodge Cummins 5.9L