Zone Offroad D28 6in Coil Spring Lift Kit - 3.5in Rear Axle | 2003-2007 Ram 2500/3500 4WD Gas

Manufacturer: Zone Offroad

SKU: ZOND28
Price
$988.80
Out of stock - Call for Availability
Ships From Manufacturer in 1-3 Days

Zone Offroad D28 6in Coil Spring Lift Kit - 3.5in Rear Axle | 2003-2007 Ram 2500/3500 4WD Gas

Features:
  • 100% bolt-on design for easy installation.
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity.

Description

It’s time to hang with the big boys. You can’t help but stand out with this 6" Lift Kit that clears 37" tires. Get the look and performance you want out of your 4WD Diesel 2003-2007 Dodge / Ram 2500 / 3500 Truck. Yet another kit from enthusiasts, for enthusiasts.

Vehicle Fitment:
  • 2003-2007 Dodge Ram 3500 4WD/Gas
  • 2003-2007 Dodge Ram 2500 4WD/Gas
  • Fits models with 3.5" rear axle

Quick Specs:
  • Front Lift Height: 6"
  • Rear Lift Height: 4"
  • Front Lift Method: Coil Springs
  • Rear Lift Method: Cast Blocks
  • Lift Type: Lift Kit
  • Wheel Size: 17 x 9
  • Back Spacing: 5"
  • Max Tire Size: 37 x 12.5
  • Wheel Size 2: 18 x 9
  • Back Spacing 2: 5"
  • Max Tire Size 2: 37 x 12.5
  • Wheel Size 3: 20 x 9
  • Back Spacing 3: 5"
  • Max Tire Size 3: 37 x 12.5
  • Finish: Powdercoat
  • Cutting Required: No
  • Accommodates Factory Wheels: See Notes
  • Welding Required: No

Important Notes:
  • If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit.
  • Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
  • Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
  • Factory wheels fit when paired with factory / original equipment tire size.
  • Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
  • Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
  • Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
  • Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.

In the Box:
  • All Necessary Mounting / Installation Hardware
  • Brake Line Brackets
  • Coil Springs
  • Control Arm Relocation Brackets
  • Dropped Pitman Arm
  • Rear Lift Block & U-Bolt Kit
  • Track Bar Relocation Bracket

Can We Help You Find Something?

Give us a call:+1-208-719-7400