Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
Heavy duty accumulator plate to prevent accumulator blowout
Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
Upgraded One Way Clutch/Sprag
Over Drive clutches 17% increase and Under Drive clutches 20% increase
Qty 3: 2C Clutch Friction
Qty 3: 2C Clutch Steel
Qty 3: 4C Clutch Friction
Qty 3: 4C Clutch Steel
Qty 15: OD Clutch Friction
Qty 15: OD Clutch Steel
Qty 7: Reverse Clutch Friction
Qty 7: Reverse Clutch Steel
Filter - Pan
Filter - Spin On
Pump Cover
Billet OD/Reverse Selector Plate
Billet OD/UD Reaction Plate
Stiffer Billet Intermediate Reaction Plate
Stiffer Billet OverDrive/Rev Reaction Plate
Billet 4C Spring Retaining Ring
Gasket - Oil Pan
Gasket - Solenoid Pack
Gasket Kit - Oil Cooler
Seal - Solenoid Pack Connector
Seal - 4wd Output Shaft
Seal - 2wd Output Shaft
Seal - Input Shaft
Seal Kit - 2-4C
Seal Kit - Input Drum
Seal Kit - Solenoid Pack
Seal Kit - Internal
Seal Kit - External
O-Ring - pump Cover
Qty 2: Check Balls 1/4in
Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
WARRANTY
Parts
12-Months
12,000 Miles
NOTE
Recommend Option - BD Heavy Duty Transmission Pan
EMISSIONS
This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)