BDS 632FS 8in Long Arm Block Lift Kit w/ FOX 2.0 Shocks | 2009-2013 Ram 2500 4WD Diesel w/ 4in Axle

Up front the lift kit includes diesel-specific Pro-Ride coil springs, all four control arms plus mounting bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned FOX 2.0 shocks. In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of  FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Recommended Tires & Wheels

38 x 13.5 with 17 x 9 and 4.5 in. Backspace

Block Kit

• Blocks are made from cast iron for strength.
• Tapered for correct pinion angle.
• Steel pin and hole are offset to restore axle position.
• Axle Diameter
• The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (IFP) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

NOTE(s):

Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require UBT4068.

Rear lift options will not fit dually applications.

If driveline vibration occurs, order either transfer case drop. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA

102009 Rear brake lines will not fit 2012-2013 models.

Additional front driveline modification may be required.

Exhaust modification will be required for dual rear shock kit 122009.

2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed

Kit Includes:

1             BDS012516         Dodge 5" Rear Block Kit w/4"     

1             BDS012801         Dodge Control Arm Mounts         

1             BDS012802         Dodge Control Arm Box Kit          

1             BDS012803         09-10 Dodge Long Arm Box Kit   

1             BDS032801         Dodge 8in Coil spring     

1             BDS122811         2009-13 Ram 2500 6bolt Indexing Ring Kit           

2             FOX98224751     Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1